Base Plaster Specifications
LeichtMix Base Plaster LM-101 is used for ALC Block/ Brick Wall application in both interior and exterior areas.
- Practical, ready to use just added water
- Premixed to ensure consistent quality
- Good adhesion with high water retention properties
- Easy to mix with good workability
- Application for interior or exterior area
|Filler||Graded Silica Sand|
|Density (wet)||Approx. 1800 kg/m3|
|Water retentivity %
BS 4551Pt 1:1998
|Stiffening Time: (min)
|Mixing Ratio||5.6 to 6.4 litre of water per 40 kgs bag|
|Thickness of Application||10 to 15 mm/coat|
|Theoretical Coverage||Approx. 2.5 m2/40 kg/10 mm thickness ￼|
The substrate must be clean & free from grease and
loose particles. Pre-wet porous substrate prior to application of plaster to prevent premature loss of water from the plaster.
Placed required amount of water in a bucket, Pour the powder while mixing for at least 3 minutes with a mechanical mixer to achieve good consistency.
Insert pressure while applying plaster to the substrate with steel or wooden trowel to ensure optimum bonding of plaster to the substrate.
To enchance the adhesion of Leichtmix plaster, a splatter dash with Leichtmix bonding agent is recommended to be applied to the substrate prior to placing the plaster.
Packing and Storage
LeichtMix Base plaster is packed in 40 kg bag.
Shelf life is 6 month if stored in original seal under cool & dry condition.