Tile Adhesive

You are here: Home Products Tile Adhesive

Tile Adhesive Specifications


LeichtMix Tile Adhesive LM-601 is a pre-packed cement-base, polymer modified,

Ready-to-used tile adhesive.

It is also recommended to use as a thin bed adhesive for vertical & horizontal application for floor and wall


  • Practical, ready to use just added water
  • Premixed to ensure consistent quality
  • Good adhesion with high water retention properties
  • Easy to mix with good workability

Technical Data

Color Grey
Binder Portland cement
Filler Lime stone & Graded Sand
Density (wet) Approx. 1800 kg/m3
Compressive strength
ASTM C109:2002
6 N/mm2
Open Time
BS EN 1346:2007
>0.5 N/mm2 
Tensile Strength ( on concrete Slab)
BS EN 1348:2007
1.0 N/mm2
Mixing Ratio  6.0 to 7.0 litre of water per 25 kgs bag
Thickness of Application   3-6 mm/coat
Theoretical Coverage Approx. 6.8 m2/25 kg/3mm thickness


Surface Preparation

All surfaces must be structurally sound, clean and free of dust, grease oil. Removed other bond inhibiting materials by using sandblasting, high pressure water blasting or other means.


Placed required amount of water in a bucket. Pour the powder while mixing for at least 3 minutes with a mechanical mixer until a smooth & creamy consistency is achieved.

Allow to slake for 5-10 minutes and re-mix.


Applying the Tile Adhesive with the desire notched for sufficient

Work area within the open time.

The Tile should be firmly pressed and tamp into position to the sub base to ensure good contact between tile and adhesive.

Packing & storage

Leichtmix Tile Adhesive is supplied in 25 kg bag


Shelf life is 6 month if stored in original seal under cool & dry condition.